Expert wood identifiers.

We never claimed to be expert wood identifiers.  In fact, I believe you can tell how much we’re not expert wood identifiers by my continued use of the phrase “expert wood identifiers.”  There’s gotta be a name for that, right?

So, we refinished the wood in the galley, which is great for us and all, but you’re probably thinking it isn’t really all that special considering we’re refinishing every piece of wood on the entire forty-seven foot long monster, and I wish you were right.  You’re not, but I wish you were.

Teak on the right, mahogany on the left.  Nice.

I bet you look at this and think you’re an expert wood identifier, don’t you?

See how the veneer on the cabinet face on the right hand side of the picture is, like, a totally different species of wood from the veneer on the left side?  Yeah, we do, too.  Now.  Now that it’s all permanently installed and we’re never ever ever changing it again.  Grumph.

So, apparently the wood on the Compass is mahogany, which isn’t totally shocking.  Believe it or not, Charlie and I actually spent quite a bit of time discussing what species we thought the wood could be.  The wood is more red than I’d like it to be, but I thought mahogany was much more red than the wood on the Compass.  And, remember, at some point someone stained most of the wood an orangey-rust color, which we found our when we first washed down the inside of the boat.  When the wood was freshly sanded, it was a mid-toned peachy brown color, kinda like newly sanded teak.  We figured the reddish hue, since it wasn’t as dark as the mahagonay samples we found, was a figment of our imagination, left over from when we first got the boat.  Too bad there’s this thing called “African Mahogany” which is known for being less red than it’s American counterpart.  Yup, our African boat has African wood.  Whodathunkit?

As far as the installation went, it was neither exceptionally easy nor exceptionally hard.  We’d never applied veneer before, so we spent a few weeks leading up the project reading up on the process.  After our individual studies, I wanted to apply our own glue and Charlie wanted to use sticky-backed veneer.  We went with Charlie’s plan on this one, since I’m much better at giving “I told you so”‘s than getting “what were you thinking”‘s.  After we’d removed all of the old veneer, and sanded and cleaned the substrate, we went to town.  At first we tried to peel away the backing from the veneer while simultaneously pressing down the exposed sticky area to the cabinet face.  This was a frustrating mess, and every time we got to a drawer cut out, the whole thing got bubbled and warped.  Finally, I decided that we’d just peel off all of the backing, exposing all of the sticky stuff, lay the veneer on our carpet glue side up, and just lay the substrate on top of it.  This may seem amateurish, but it worked like a charm.  It’s not like we have a woodshop to do this in, and we’re not planning on doing it many more times.

Charlie cutting out veneer for the doors and drawers.

After we got the stuff stuck on, we cut the veneer away from the drawer and door openings.  We were careful to preserve the pieces well so that we could use them on the actual drawer and door faces.  Charlie completed that part on his own, and did a damn fine job making those little circles for the door pulls.

The truth is, we actually noticed that the teak we ordered was much different from the wood on our boat as soon as we opened the package, but the cost of sending the stuff back, combined with the restocking fee and the cost of having new mahogany veneer shipped was more than we were willing to shell out.  Instead, we purchased some mahogany marine-grade stain (I know, I know) and tinted the teak a bit. We finished everything with West Marine Wood Pro under Interlux Gold Spar Satin.  The Interlux isn’t as easy to work with as the Epifanes, in my opinion, but it looks just fine.  I’d think it looked top-notch if we weren’t comparing it to the Epifanes.  I think it has a more hazy finish than the Rubbed Effect on the rest of the boat, but it’s not noticeable enough to complain about.  As I mentioned in a previous post, we’re not willing to go through the hassle of using a mislabeled Epifanes product again.

We’re pretty happy with the job overall, especially considering that neither of us had ever attempted anything like it before.  Someday we may try to match the veneer we redid to that in the rest of the boat, but, hey, maybe someday we’ll win the lottery and I’ll convince Charlie that we should have the whole thing redone in maple (yes, I’m a living stereotype).  For now, we’re just happy to be sixty-five percent done with the interior woodwork.

In an attempt to change things up a bit, we’ve shifted focus and have started rebedding deck hardware.  This means that we’ve finally pulled down some of the headliner (yes, I think we’re doing some things backwards, too), and I’m pleased to report that the underside of the deck looks marvelous and strong.  We always worry about what we’ll find, and we’re always left pleasantly surprised.  You’d think we’d realize by now that this boat is just amazing.  We were truly blessed when we found our Compass.

As for me personally, I’m headed down into the garage to put a forth coat of varnish on the v-berth headliner.  It never ends, folks.  Sixty-five percent, my ass.

Our continued adventures in varnishing: Spring 2012.

We’ve closed out yet another season on the hard.

Once again I have to thank the universe for the boatyard where we both found and currently house the Compass.  For almost eight months we’ve taken over quite a large patch of asphalt there, and they still treat us like family.

Epifanes Rubbed Effect on the salon table.

During the spring, we settled on a matte top coat for all of our interior wood.  We applied Epifanes Rubbed Effect on most large surfaces, and it worked out pretty well. At first we were using Epifanes Rapidclear for the build coats, but then we heard that West Marine’s WoodPro was a rebadged version of the exact same product.  We haven’t attempted to confirm this, but we suspect it’s true.  Both go on with extreme ease, and sand well for the finish coats.  We’ve had no adhesion issues so far, no peeling when sanding or weird shine-through.  While it’s been a lot of work, it’s been a relatively simple, satisfying project.  And the Rubbed Effect top coat is a pretty nice matte.  I mean, it looks nice, doesn’t it?  Too bad we won’t be using it anymore.  I haven’t chronicled the galley refinish project yet, but I’ll give away one part of the story here:  Epifanes must have had a labeling problem for a while, because we wasted about six hours applying, sanding, reapplying from a new can, and again sanding some sort of gloss varnish that was living in Epifanes Rubbed Effect cans.  Our local West Marine was good enough to take both cans (which had different batch numbers on the bottom) back for a refund.  In the post about the galley, I’ll be writing to you about how much we now love the finish of Interlux Goldspar Satin.  Heh!  At least we’re trying a little bit of everything.

Charlie performing the initial sanding of my very thick application of filler.

Have I mentioned that the yard we’re at is awesome?  Now some of you lucky salts may be wondering what the big deal is.  Maybe you live up north and get to haul out every winter in a yard that lets you do all of your own work.  We’ve been there, too, but here in Florida, things are quite different.  Self-service yards are few and far between, and once you find one, expect to dole out big bucks if you’re staying more than a day.  We’ve been on the hard almost eight months, and you haven’t seen me cry over money (yet).  Yes, I know how lucky we’ve been.

Before the barrier coat went on the Compass, management at the yard gave us a few days to fill and fair the bottom of our boat.  As with most things on the Compass, we got very lucky with the bottom.  The bottom was in good shape, and everything we did was either preventative or cosmetic.  We started out using epoxy and filler we mixed from ingredients we purchased from Fiberglass Coatings here in St. Petersburg.  This was fine, but we were having a hard time maintaining consistency, so we switched to a two part 3M marine filler.  First we machine sanded, then we finished off with hand sanding.  This little bit of extra effort got us a very nice, fair bottom, if I do so say myself.  We’re not experts by a long shot, but we’re always willing to learn new tricks in order to get the best possible result.

Ultramar.  Now I realize it’d be pretty ironic for a sailboat.

Charlie and I haven’t named the boat yet, and I have a feeling that when we do finally agree on something, it’s going to be pretty darn generic.  He and I have different ideas about what makes a good boat name.  I think it should be something personal – something that tells everyone a little bit about us.  Charlie thinks it should have more to do with the boat, and prefers Afrikaans names.  While we were doing the bottom, I came up with what I thought would be a great, and by great I mean extraordinarily generic, name for the boat.  Both Charlie and his dad liked the name, and I was feeling pretty cool.  Too bad Ultramar is the name of a Canadian gas station.  Live and learn.

So, those are some of the highlights of our spring on the hard.  Take a peek at the photo album Ive thrown together for a closer look, including pictures of our never before seen aft head, me, under a table, and our nav station … naked.  Oooooh.  Saucy.

And We Varnished: Compass, Winter 2011-12

Since I’ve recently added quite a few photos to the album showing off our fabulous winter on the hard, I thought I’d spend a little time highlighting a few of the jobs we did.  You’ll read this and say, “gee, I could have gotten a lot more done in four months,” and you’ll be right.  You’re always right, you salty dog.

I discussed the problems that have kept us out of the water in a previous post.  We’d hoped to splash the boat repowered and with a nice new bottom in December, and then leisurely tackle our interior projects from the comfort of a marina in downtown St. Petersburg.  As it sits, I don’t remember what a boat bobbing around in its slip feels like, as the Compass has been a forty-seven foot long treehouse since November.

Here are some of the highlights from our winter on the hard.  Be sure to take a look at the album for a more tedious (if you can believe it) version of the story.

Practicing throwing acid, in case I become a villain's henchman someday.

There were things we rushed to get done when the boat came out of the water, since we actually believed it would be going back someday.  We cleaned and removed the two blade, feathering Max Prop, as well as the old saildrive.  We’ve taken the the prop apart, cleaned and inspected the mechanisms, and it appears to be in good shape.  Charlie has always wanted a Max Prop, so we’re very pleased with our good fortune in that regard.  We listed the old saildrive on eBay and some other websites, thinking someone would want it for parts, but it’s still in our garage, collecting dust (which only improves its looks).

He's either doing cosplay or preparing for a nuclear attack (or doing cosplay of a guy preparing for a nuclear attack).

We had plenty of time to walk around the outside of the boat being very critical of things, which is good, of course, but it always leads to Charlie dressed up in a Tyvek suit sanding fiberglass.  We’re not big fiberglass lovers.  Raw fiberglass gives me hives and sanded fiberglass does the same for Charlie.  Together we’re like some new race of devolved, immunity-impaired bubble people (except that would mean we were related, which is either really gross, or really kinky).  This winter, Charlie filled three old through-hulls, and drilled a new one for our speed transducer.  He touched up some scrapes around the saildrive hole (I still don’t have a better name for this), repaired some delamination on the skeg, and fixed some cracks in the giant rudder.  We’ve also done a little fairing here and there, but the boat didn’t need any major work in that regard, believe it or not.  Not a blister to be found (I’ve jinxed us, haven’t I?).

I wonder if my little brother ever looks at pictures of me and thinks about how alike we look?

The Compass came with a single cylinder Mase Mariner diesel generator installed in the starboard lazarette.  According to the meter, the thing only has seven hours on it, so it was out of the boat, and up for sale!  Lucky for me, I’m only five-feet tall and still relatively small-of-ass.  This means I get tight-space duty, and there are plenty of those jobs available on this boat.  After all the wiring, mounts, and copious amounts of loose, old sound-deadening were off, we removed the beast with the help of the boatyard manager and his trusty forklift.

Charlie used to work as a yacht rigger at SSMR, a rigging shop that’s well-known both here in town, and to all sort of sailors across the globe who connect with the shop’s owners on forums and mailing lists here on the Internet.  Steve, Jennifer, and Andrew let their eager former employee use their shop to  measure and cut and swage together some new lifelines for the Compass.  Having a yacht rigger for a partner in a project like this comes in handy, let me tell you.

Most of our winter was taken up by one project.  Well, one project that entails giving very careful attention to almost every interior surface of the boat.  My, did we spend a lot of time varnishing.

Charlie is one of those.  As I’ve mentioned before, his previous boat, a 1971 S&S 34, looked like museum inside.  I still haven’t figured out if he loves to varnish, or if he really just loves varnished wood.  Either way we end up high on fumes, so the reasons don’t seem all that important.  Though the wood on the Compass was in rough shape when we found her, it’s really high quality stuff.  With a little love, most of it has recovered nicely.  The boards that make up the cabin sole are probably the best bit.  They’re thick, and we’ve been able to machine sand them to remove lots of who-knows-what that they all seemed to be covered with.  Any photos I take will not do the varnish job justice.  I wasn’t sure that anyone could rescue the interior of the Compass, but Charlie has made a believer out of me.

So there it is.  It may be disappointing that we spent the winter on the hard, but we gotten quite a bit done.  We were blessed to find this budget beauty, and we’ve been lucky to have the help we did from Charlie’s father, the folks at the boatyard, and a few good industry connections.  Now that the saildrive/engine bed project is finally underway, we’re able to make out a little glimmer of light at the end of the tunnel.